Class 8 Science Chapter 4: Electricity: Magnetic and Heating Effects
NCERT Curiosity · Simple notes, key terms and practice questions
Electric current has a magnetic effect, used in electromagnets, bells and motors, and a heating effect, used in heaters and irons and controlled by fuses and MCBs. The chapter also shows how a cell turns chemical energy into electricity.
Key concepts
Magnetic Effect of Current
A wire carrying electric current behaves like a magnet and deflects a nearby compass needle.
Example: Switch the current on and the compass needle turns; switch off and it returns.
In real life: Every electric motor depends on this effect.
Electromagnets
Wind insulated wire around an iron nail and pass current: it becomes a magnet that works only while current flows.
Example: More turns of wire or more current make a stronger electromagnet.
In real life: Electric bells, speakers and motors use electromagnets.
Heating Effect of Current
When current flows through a wire, the wire gets hot. Wires with high resistance heat more.
Example: Heaters, irons and toasters use nichrome coils.
In real life: This is why an iron gets hot when switched on.
Safety: Fuse and MCB
A fuse wire melts and breaks the circuit when too much current flows. An MCB switches off automatically.
Example: Overloading a socket with many appliances can melt a fuse.
In real life: MCB boxes protect modern homes.
How a Cell Makes Electricity
A cell changes chemical energy into electrical energy. A battery is two or more cells joined together.
Example: A lemon with a copper strip and a zinc strip makes a small cell.
In real life: Mobile phones run on rechargeable lithium-ion batteries.
Key terms
| Term | Meaning |
|---|---|
| Electromagnet | A magnet made by electric current |
| Fuse | A safety wire that melts on overload |
| Heating effect | Wire getting hot when current flows |
| Electric cell | Changes chemical energy to electrical energy |
| Battery | Two or more cells joined together |
Quick revision
- A current-carrying wire deflects a compass needle.
- An electromagnet works only while current flows.
- A fuse melts when too much current flows.
Practice questions
Q1. A compass needle moves near a current-carrying wire. This shows the
- Sound effect of current
- Chemical effect of current
- Heating effect of current
- Magnetic effect of current
Show answer
D) Magnetic effect of currentQ2. Who discovered this effect in 1820?
- Michael Faraday
- Hans Christian Oersted
- Alessandro Volta
- Thomas Edison
Show answer
B) Hans Christian OerstedQ3. An electromagnet is made by
- Cooling a copper wire
- Winding wire around iron and passing current
- Heating a nail
- Rubbing iron with a magnet
Show answer
B) Winding wire around iron and passing currentQ4. An electromagnet becomes stronger if you
- Use a plastic core
- Reduce the current
- Increase the turns of wire
- Remove the iron core
Show answer
C) Increase the turns of wireQ5. The heating coil of an electric iron is usually made of
- Copper
- Nichrome
- Plastic
- Glass
Show answer
B) NichromePractise all 10 questions + chapter test
GyaanPe gives Class 8 students short lessons, quizzes and a chapter test for “Electricity: Magnetic and Heating Effects”. Free to start, no ads.
Practise free on GyaanPe Use in browser